php5.3 安装mcrypt的方法 梁朝伟

For me the answer was:

1) Get the Repos from

wget http://dl.fedoraproject.org/pub/ ... ease-6-8.noarch.rpm
wget http://rpms.famillecollet.com/enterprise/remi-release-6.rpm
sudo rpm -Uvh remi-release-6*.rpm epel-release-6*.rpm
2) Install it via:

sudo yum update
sudo yum install php-mcrypt*
3) Edit the mcrypt.ini

sudo nano /etc/php.d/mcrypt.ini
add this

extension=/usr/lib64/php/modules/mcrypt.so
Finally
4) Restart your webserver:

sudo service httpd restart
I run this steps in CentOS 6.3 (64) on Azure From Microsoft Linux image

Hope it helps you.

Best Regards.

yum -y install httpd php53 php53-bcmath php53-cli php53-common php53-dba php53-devel php53-gd php53-imap php53-intl php53-ldap php53-mbstring
php53-mysql php53-odbc64 php53-pdo php53-pgsql php53-process php53-pspell php53-snmp php53-soap php53-xml php53-xmlrpc php-pear


wget http://downloads.sourceforge.net ... &use_mirror=ncu

wget http://downloads.sourceforge.net ... &use_mirror=ncu

wget http://downloads.sourceforge.net ... &use_mirror=ncu
wget http://museum.php.net/php5/php-5.3.3.tar.gz



yum -y install gcc gcc-c++ make
tar zxf libmcrypt-2.5.8.tar.gz
cd libmcrypt-2.5.8
./configure
make
make install
cd ..

tar zxf mhash-0.9.9.9.tar.gz
cd mhash-0.9.9.9
./configure
make
make install
cd ..

tar zxf mcrypt-2.6.8.tar.gz
cd mcrypt-2.6.8
LD_LIBRARY_PATH=/usr/local/lib ./configure
make
make install
cd ..

tar zxf php-5.3.3.tar.gz
cd php-5.3.3/ext/mcrypt/
/usr/bin/phpize
./configure --with-php-config=/usr/bin/php-config
make
make install

echo 'extension=mcrypt.so' > /etc/php.d/mcrypt.ini
/etc/init.d/httpd reload
php -m |grep 'mcrypt'

居说红帽子将不再对mcrypt提供支持，导致一些国外的开源PHP项目无法正常工作。其实解决的方法依然很简单。步骤如下：
下载同版本PHP的源代码
解压PHP源代码后，进入 ext/mcrypt目录
自己手工编译 mcrypt 源代码，生成 mcrypt.so
修改 /etc/php.ini 文件，添加 mcrypt.so
编mcrypt步骤：
进入mcrypt目录，执行以下操作
phpize
./configure --with-php-config=/usr/bin/php-config
make
make install
如果在编译过程中发生错误，如：error: ‘PHP_FE_END’ undeclared here (not in a function)
可先执行以下命令再进行编译操作：
sed -i 's|PHP_FE_END|{NULL,NULL,NULL}|' ./ext/**/*.c
sed -i 's|ZEND_MOD_END|{NULL,NULL,NULL}|' ./ext/**/*.c

编译成功后，会在 /usr/lib/php/modules 目录下生成 mcrypt.so 文件
修改/etc/下的 php.ini文件，添加：extension=mcrypt.so
然后重新启动web服务程序，你的php5.3+将完成对mcrypt的支持设置

系统环境：centOS6.3
APACHE：httpd-2.4.2
PHP：php-5.3.21
一.安装mcrypt
1.下载Libmcrypt,mhash,mcrypt安装包

1. libmcrypt-2.5.8.tar.gz
   
2. # wget http://sourceforge.net/project/showfiles.php?group_id=87941&package_id=91774&release_id=487459
   
3. mhash-0.9.9.tar.gz
   
4. # wget http://sourceforge.net/project/showfiles.php?group_id=4286&package_id=4300&release_id=645636
   
5. mcrypt-2.6.8.tar.gz
   
6. # wget http://sourceforge.net/project/showfiles.php?group_id=87941&package_id=91948&release_id=642101

复制代码

2 .先安装Libmcrypt

1. # tar -zxvf libmcrypt-2.5.8.tar.gz
   
2. # cd libmcrypt-2.5.8
   
3. # /usr/local/php5/bin/phpize #动态编译php模块，使其可以使用configure编译。
   
4. # ./configure
   
5. # make
   
6. # make install     # libmcript默认安装在/usr/local

复制代码

3.安装mhash

1. # tar -zxvf mhash-0.9.9.9.tar.gz
   
2. # cd mhash-0.9.9.9
   
3. # /usr/local/php5/bin/phpize
   
4. # ./configure
   
5. # make
   
6. # make install

复制代码

4.安装mcrypt

1. # tar -zxvf mcrypt-2.6.8.tar.gz
   
2. # cd mcrypt-2.6.8
   
3. # /usr/local/php5/bin/phpize
   
4. # ./configure --with-php-config=/usr/local/php5/bin/php-config
   
5. # make
   
6. # make install

复制代码

安装完毕,按照编译安装后的提示
mcrypt.so模块会默认保存在 /usr/local/php5/lib/php/extensions/no-debug-zts-20090626/ 目录下
5.加载该模块到php

1. # vi /usr/local/php5/lib/php.ini

复制代码

添加如下行：

1. extension = "/usr/local/php5/lib/php/extensions/no-debug-zts-20090626/mcrypt.so"

复制代码

重启apache:

1. /usr/local/apache2/bin/apachectl restart

复制代码

6.添加phpinfo功能，测试页面
添加以下内容info.php到/usr/local/apache2/htdocs/下,测试php模块是否加载.

1. # vi  /usr/local/apache2/htdocs/info.php

复制代码

1. ---------------
   
2. <?php
   
3. echo phpinfo();
   
4. ?>
   
5. ---------------

复制代码

检查80端口是否打开

1. # lsof -i:80

复制代码

浏览器输入 http://localhost/info.php
显示有如下测试页面内容, mcrypt.so模块即在PHP下加载成功

好帖，有才！

这么强,支持楼主，佩服

看看吧，大家都会支持你